Remote Button Function Showing
S
tandby and Start Button, when device is working normally, it will go to Standby
status if you press the button and also the Standby Led Status Light will go bright; when
press the button again, the device will back to normal working status and the Standby LED
Light at device will also off.
EDID
：
2CH
：
EDID 2.0 Button. After press the 2.0 button, the 2.0CH LED light will go
bright, and the device will change to support only LPCM 2.0 Audio Format; the source will
output LPCM 2.0 audio as the supplied info from the device.
5.1CH
：
EDID 5.1 Button. After press the 5.1 button, the 5.1CH LED light will go bright,
and the device will change to being compliant with Dolby-AC3,DTS ,LPCM2 .0 Audio Format;
the source will output the best audio format as the supplied info from the device and the
source film supported audio format.
