Monaco Camelot 2007, Руководство пользователя

Страница: 134 / 258

Section 5 — equipment
130
camelot 2007
If the satellite antenna receives
intermittent signals or cannot
locate the satellite, check around
outside of motorhome for
blockage such as trees, building,
etc. The satellite antenna must
be located in the selected
satellite’s coverage area in order
to receive a signal.
NOTE
The satellite receiver
must be turned on for the
system to function.
NOTE
As part of the startup
process, the System will
default to channel 200, a
program directory. This
is the system’s means
of verifying that it has
identified and is tracking
the correct satellite. Once
channel 200 appears,
wait at least another 30
seconds before changing
the channel to ensure
that the system has completed
the startup routine.
For Dish 500 subscribers:
After being locked onto a satellite Dish 500
subscribers can switch back and forth between
the 110 and 119 satellites.
To switch satellites:
Press and hold the 3 position switch for 1
second. Up will switch to 119 while down will
switch to 110.
System Start-up:
Upon power-up, the system performs a
set of start-up routines.
Antenna then searches for a TV satellite.
After locating a satellite, the IRD data
connection determines whether the
satellite signal can be decoded. If so,
the antenna locks onto and tracks the
satellite.
NOTE
Once the startup procedure is complete
and the antenna is locked onto the
correct satellite, the power switch may
be turned off to avoid unnecessary
discharge of house battery power.
Because the antenna LNB receives its
power from the IRD, the antenna will
continue to receive the satellite TV
signals and relay them to the IRD.
NOTE
If the antenna is unable to locate the
desired satellite, refer to the OEM
Manual for possible causes and
corrective actions.



“Instant On” Operation:
As part of operation, the satellite routinely
saves its position to memory. When turned on,
the system looks at the last saved position and
if the motorhome has not changed location, the
antenna will immediately acquire the signal.
If the motorhome moves after the system is
turned off, the antenna will quickly carry out
normal initialization routine to re-acquire the
satellite. To turn the system off, press the Power
button.
NOTE
It is highly recommended that the
system be turned OFF prior to moving
the motorhome. The system will not
track a satellite while the motorhome is
in motion.
The system requires the following preventive
maintenance for optimum performance.
Monthly:
Wash the exterior of the radome and base
plate assembly with fresh water; a mild
detergent may be added to remove grime.
DO NOT spray the radome directly with
high-pressure water.
DO NOT apply abrasive cleaners or
volatile solvents, such as acetone, to the
ABS dome.
Annually:
Have the satellite system inspected by a
professional RV Technician or satellite
installer.



031197
Remote
031199
031027b