momoDESIGN MD-FS100W, Руководство пользователя, Страница: 90 / 96

90
MAINTENANCE OF THE ELECTRIC KICKSCOOTER
The electric kickscooter requires routine cleaning and maintenance.
First, make sure the charging cable is not connected.
Second, the electric kickscooter must be power off.
Be sure that the safety cap is well positioned on the charging port.
Now you can wipe the case of the electric kickscooter with a soft damp cloth.
Sun, warm temperatures and cold temperatures might damage the battery.
Avoid water or other liquids seep into the electric kickscooter. The internal electronics would be permanently damaged.
The electric kickscooter is dustproof and splash proof (waterproof rating is IPX4).
CAUTIONS
1.
P
lease refer to your local retailer if you want to replace any component. Replacement of any component should be done by the Retailer
of by authorized after-sale offices.
2.
A
note specifying that the self-tightening nuts as well as the other self-tightening fastenings may lose their efficiency and that they
may need to be retightened. Please periodically check that all screws are correctly tighten.
Adjust the brake disc
If a brake is very tight: use a hex wrench and scroll counterclockwise screws of brake disc tensioner pulley, slightly increase a length of a
tail brake cable, then tighten a tensioner pulley. If you think that brake is too loose, loosen a tension pulley, pull a brake cable to slightly
shorten a length of its tail. Tighten a tension pulley.