momoDESIGN MD-FS100W, Руководство пользователя, Страница: 79 / 96

79
DISPLAY
The display on the handlebar will turn-on after powering the kickscooter.
The display shows:
•
the speed during use of the electric kickscooter; speed is showed in Km/h
by default, but it can be switched to M/h
(1) ;
•
the gear: maximum speed with gear 1 is of 10Km/h, maximum speed with
gear 2 is of 15Km/h and maximum speed with gear 3 is of 20Km/h. Gears
can be switched pressing the power-button. For safety reason, the change
of gear can be done when the kickscooter is stopped only
(2) ;
•
the icon for lights: front and rear lights must always be turned-on during
the use of the kickscooter
(3) ;
•
Bluetooth icon: not valid for this model
(4)
;
• brake icon: it turns on when the brake lever is used (the light of the rear
light will be brighter when the brake is activated)
(5)
;
• ODO info that indicates the total mileage (this information will be kept after
switching off the device)
(6)
;
• TRP info that indicates the single driving distance after switching on (the
distance info will be cleared after switching off the device)
(7)
;
•
ODO or TRP details
(8)
;
•
alarm icon for low battery
(9)
: when all four led lights in the bottom are
fully turned-off, this icon turns-on; it is suggested to stop, turn-off the
electric kickscooter, and provide for a new battery charge;
•
led lights that shows the battery level of charge
(10)
: during use of the
kickscooter, the 4 LED lights are lit. During comsumption of the battery the
indicators turn-off, one by one. If 4 LED lights are lit, mean full power. If 3
LED lights are lit, mean 85-70% power.
When only 1 LED light is lit, there is a charge of around 10-15%.
Slow-down, stop and provide for a new battery charge.
EN