Operating Instructions Of Power Button
1. Power ON/OFF
- Tap for 1 sec to Power on.
- Tap & hold for 2 secs to Power off.
2. Cool Fan speed
When the fan is operating, tap repeatedly to adjust the fan speed (up to
9-speed settings).
3. Heater speed
When the heater is operating:
- Tap to display the environmental temperature.
- Tap repeatedly the button to adjust the heater speed (up to 4-speed
settings).
4. Oscillation
When the fan is operating, tap the button for 1 sec, the fan will start to
oscillate.
Tap the button for 1 sec again to stop oscillation.
Press “heater mode sign” to turn on heater mode.
LED screen will display the environmental temperature* (envt temp
℃
).
Adjust the temperature setting, the number shown in the screen will flash
ranging from 1-30
℃
, stop flashing after 5 secs once finish the setting,
- Heater temperature setting > Environmental temperature: heater mode
is ON.
- Environmental temperature ≥ Heater temperature setting: heater mode
STOPS ; before stop, it continues to run for 40 secs to detect envt temp
℃.
- Environmental temperature < Heater temperature setting: heater mode
resumes to previous temperature & speed setting.
Note: heater default temperature setting as 25
℃
When envt temp
℃
is below 0
℃
, LED screen will show 01
only, negative
℃
will not be shown. AP7S will turn off automatically after operating 9 hours
heater. Restart by Momax smart APP/ remote control/ power button.
Remarks: Heater first delivers heat from left side air outlet, will deliver
heat from right side after 20 secs. Both sides will deliver heat
afterso. This is a normal phenomenon.
* Built-in thermostat sensor can sense the environmental temperature
automatically: when heater mode is ON, the envt temp
℃
will first be
displayed. Users can adjust the temperature setting (the temperature
should be higher than the envt temp
℃
); When the envt temp
℃
reaches the heater setting temperature, the heater will stop running
to avoid excessive drying of the environment and long-term activation
of the heater. When the envt temp
℃
is lower than the adjusted heater
temperature, the heater will resume to ensure a warm environment. It
can maintain the warmness in room and achieve energy saving.
Operating Instructions Of Heater Mode
16
17
