Docon7
Multicharger
Installation and start-up
Page 13 of 26
Connecting
Set up the device in the desired position with the feet at the bottom.
Insert the connecting cable into the power supply input socket at the back of the device.
Insert the connecting cable into a mains socket. Pay attention to the voltage indicated on the
identification plate.
Switching on
1. To switch the
Docon7 Multicharger
on, press the ON switch at the back of the device.
2. All 10 LEDs on the front of the device will then light up red and the
Docon7 Mul-
ticharger
is ready for use.
Switching off
1. After completing the charging processes, turn the
Docon7 Multicharger
off by press-
ing the ON/OFF switch.
