Docon7
Multicharger
Product description
Page 11 of 26
Device feet and grip
For tabletop operation, the
Docon7 Multicharger
must be placed on the feet provided.
Alternatively, the grip can be used as a stand. If the device is at a low operating height, the
charging bays can be easily accessed and the status LEDs are easier to see.
The
Docon7 Multicharger
can be transported using the carrying grip when there are no bat-
teries in the charging bays.
Status display
The status LEDs on the front of the device (above each charging bay) provide information on
the operating and charging status of the device and battery.
Cooling
There are two fans next to the ON/OFF switch, these dissipate any system heat which is
created inside the device during charging into the ambient air.
Do not block the back of the device around the fans either directly or indi-
rectly; sufficient air circulation and heat dissipation must be ensured.
A safety distance of at least 15 cm must be maintained between the device
and the next nearest obstacle.
Overview of signal statuses
The following signal statuses are indicated by the LEDs above each battery bay.
Status
Color
LED
Operating mode,
fault
(no battery inserted)
Red
On
Operating mode, charging
Blue
On
Operating mode, charging complete
Green
On
Operating mode,
fault
(with battery inserted)
Red
On
