manualshive.com logo in svg

molex RHT 2251-CC, Инструкция по эксплуатации и технические характеристики, Страница: 4 / 6

Поделиться
Скачать
molex RHT 2251-CC Скачать руководство пользователя страница 4

RHT2251-CC Hand Crimp Tool 

Doc No.  64001-4900 

Release Date: 10-15-04 

UNCONTROLLED COPY

 

Page 4 of 6 

Revision: A 

Revision Date: 10-15-04 

Caution:

 Repetitive use of this tool should be avoided

. 

 

Tool Calibration 

 
A Certificate of Calibration (see last page) was supplied with the tool.  To 
recalibrate this tool, pin gauge measurements should be taken in each 
conductor nest and compared to this chart.  The tool should be lubricated 
prior to recalibration to ensure consistent measurements.  Handle preload is 
factory set to 25-45 LBS. See How to Adjust Tool Preload (See Figure 5) to 
recalibrate. 
 
 
 

Wire Range 

“X” Dimension 

Conductor Crimp 

Nest Color Code 

AWG mm² Mean 

Go 

No 

Go 

Crimp 

Inspection 

Marking 

10 - 12  5.00 – 3.30  .127  .124 

.132 

o 

Yellow 

14 - 16  1.30 - 2.00 

.127  .124 

.132 

o 

 

Warranty 

 
This tool is for electrical terminal crimping purposes only.  This tool is made of the best quality materials.  All vital components are 
long-life tested.  All tools are warranted to be free of manufacturing defects for a period of 30 days.  Should such a defect occur, we 
will repair or exchange the tool free of charge.  This repair or exchange will not be applicable to altered, misused or damaged tools.  
This tool is designed for hand use only.  Any clamping, fixturing, or use of handle extensions voids this warranty.  
 
Hand held crimping tools are intended for low volume, prototyping, or repair requirements only. 
 
 
 
 
 
 
 
 
 
 
 

PIN GAUGE IN 

CONDUCTOR CRIMP 

“ Confining ” Crimp 

X 

Содержание RHT 2251-CC







Отзывы:

Нет отзывов