AT-FIFG Air Head Crimp Tool
Doc No. ATS-640054100
Release Date: 09-22-03
UNCONTROLLED COPY
Page 6 of 6
Revision: C
Revision Date: 04-12-12
Air Powered
Crimp Tool Head
InsulKrimp™
Certificate of Calibration
Order No. 64005-4100
Engineering No. AT FIFG
Tool Order Number -----------------------------
Tool Eng. Number -----------------------------
Tool Revision ----------------------------
Serial Number -----------------------------
Date of Manufacture ----------------------------
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = -------------------- Actual = --------------------
Range Conductor Nest # 2 = -------------------- Actual = --------------------
Technician --------------------
Date of Calibration --------------------
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Visit our Web site at http://www.molex.com
