AT-2212 Air Crimp Tool Head
Doc No: ATS-640053600
Release Date: 06-24-03
UNCONTROLLED COPY
Page 8 of 8
Revision: B
Revision Date: 09-30-05
Air Powered
Crimp
Tool Head
Certificate of Calibration
Order No. 64005-3600
Engineering No. AT 2212
Tool Order Number_____________________
Tool Eng. Number______________________
Tool Revision_________________________
Serial Number________________________
Date of Manufacture____________________
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = ____________-- Actual = ______________
Range Conductor Nest # 2 = ____________-- Actual = ______________
Range Conductor Nest # 3 = ____________-- Actual = ______________
Technician ______________
Date of Calibration ______________
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Visit our Web site at http://www.molex.com
