AT-2214 Head Crimp Tool
Doc No: ATS-640053400
Release Date: 06-23-03
UNCONTROLLED COPY
Page 7 of 7
Revision: B
Revision Date: 09-30-05
Air Powered
Crimp
Tool Head
Certificate of Calibration
Order No. 64005-3400
Engineering No. AT 2214
Tool Order Number_____________________
Tool Eng. Number______________________
Tool Revision_________________________
Serial Number________________________
Date of Manufacture____________________
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = ____________-- Actual = ______________
Technician ______________
Date of Calibration ______________
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Visit our Web site at http://www.molex.com
