AT7050 Air Crimp Tool Head
Doc No. 64005-0900
Release Date: 10-10-02
UNCONTROLLED COPY
Page 7 of 7
Revision: F
Revision Date: 05-11-05
Certificate of Calibration
Tool Order Number_____________________
Tool Eng. Number______________________
Tool Revision_________________________
Serial Number ________________________
Date of Manufacture____________________
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = ____________-- Actual = ______________
Range Conductor Nest # 2 = ____________-- Actual = ______________
Range Conductor Nest # 3 = ____________-- Actual = ______________
Technician ______________
Date of Calibration ______________
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Molex Application Tooling Group
1150 E. Diehl Road
Naperville, IL 60563
Tel: (630) 969-4550;
Fax: (630) 505-0049
