Molecular Devices QPix 420, Руководство пользователя

Страница: 120 / 225

QPix 420 Colony Picking System User Guide
120 5031496 G
Creating and Editing Blue-White Regional Picking Processes
The procedures to create and edit standard or regional picking processes are similar. The
regional picking process has more options available for defining the regions for picking.
To run a Blue-White standard picking process, see Blue-White Picking Processes on page 63 .
If this is the first regional picking process, you must edit or create a Sanitise profile to use with
the regional picking process. See
Creating and Editing Sanitise Profiles on page 33 .
Creating and editing a regional picking process involves the following procedures:
Opening the Blue-White Regional Picking Window on page 120
Selecting Blue-White Regional Picking Routines on page 121
Selecting Barcode Options on page 122
Setting Destination Plate Options on page 124
Selecting the Regional Picking Source on page 124
on page 124
on page 125
Viewing the Settings Summary on page 126
After creating the routine, you can close the process and run it later, or you can run it
immediately.
Note: Some steps that are included in these procedures might not be available,
depending on the features included with the instrument and license.
Opening the Blue-White Regional Picking Window
To open the blue-white picking window:
1. From the Navigation window under Picking Processes, double-click the Blue-White
Regional Picking icon.
2. In the Blue-White Picking window, click Picking Type to view the picking type options.
Select Blue/White Picking (default setting) to use white light to illuminate and identify
blue and white colonies to pick.
Select White Only Picking to use white light to illuminate and identify only white
colonies to pick.
3. Click Apply.
4. Click Start to home the drives and display the Routines window.