Molecular Devices MultiWash+, Руководство пользователя

Страница: 44 / 152

Mi Microplate Washer User Guide
44 5032022 C
Select the Bottle for the Prime or Rinse Process
Before you can run the periodic prime or rinse process, you must select the bottle to use.
The labels above the fittings where the bottles connect to the rear of the instrument match
the names of the bottles in the software.
Figure 4-17: Fittings for Fluid Bottle Connections
Figure 4-18: The Liquid prompt
Button Action
On the left
Press this button to end the process and return to Prime/Rinse . See Priming or
Rinsing the Fluidics System on page 31 .
On the right
The button has no function for this option.
Press this button to scroll forward through the list of wash and rinse bottles.
Press this button to scroll backward through the list of wash and rinse bottles.
Press this button to confirm the bottle selection and go to the next step. The software
displays a series of optional prompts to make sure that the instrument is ready for the
procedure. If no options have been enabled, then you can define the volume of liquid
to use for the periodic prime or rinse process. See
Defining the Liquid Volume for the
Prime or Rinse Process on page 47 .
Table 4-11: Actions of Control Panel Buttons