Using PVC glue (not included), attach hard or flexible PVC piping to the two included
connectors, taking note of the orientation of the intake and discharge and the location of the
tank. Connection size is 1.5" and hard PVC piping should be 1.5" for inlet and discharge.
Note 1:
The intake and discharge piping should be as short as possible. Do not exceed 20 feet for
either the intake or discharge pipes.
Note 2:
The unit should not be placed more than six feet above the nominal water level.
Refer to owner’s manual piping placement and pump restrictions.
Included glue-able connections should be hand tightened only, do not use tools to tighten onto
the pump or discharge. Ensure all connections are tight before beginning startup steps.
Attach Piping
Startup
NANOBUBBLE GENERATOR
|
Quick Start Guide
Scan to Download
the Owner’s Manual
and access warranty
information for the Lotus
Nanobubble Generator.
www.moleaer.com
Copyright © 2022 Moleaer. All trademarks stated herein are the property of their
respective company. All rights reserved. This document is confidential and contains
proprietary information of Moleaer Inc. Neither this document nor any of the
information contained herein may be reproduced, redistributed or disclosed under any
circumstances without the express written permission of Moleaer Inc. Rev. 07-05-22
Please contact Moleaer with any
questions or concerns: +1.424.558.3567
4
5
4.1
4.2
Hand-tighten any
loose fittings.
Open the lid of Lotus
and open any isolation
valves between the unit and
tank on both the inlet and
discharge pipes
When the pump strainer
fills with water, tighten the
pump strainer basket lid by
turning the lid clockwise.
Run the unit for a minimum
of 60 minutes. Adjust the
oxygen regulator knob to
meet the desired levels of
dissolved oxygen.
Remove the pump
basket lid by turning it
counterclockwise. With
flooded suction, the basket
should fill by gravity.
Turn the oxygen regulator
knob to ¼ (1/4 lpm). Check
for any leaks inside the
enclosure at various
connection points.
Check that water is flowing
through the pump by
verifying that the strainer
basket is filled with water.
Turn the Lotus on by
pushing the start button.
5.2
5.1
5.6
5.5
5.3
5.7
5.4
5.8
60 min
