Section 4 - Overview
WARNING
Ensure that you have fully read “Section 3 - Safety” before setting up or
operating the E-Drive controller.
4.1 System Overview
E-Drive is a servo-driven controller for up to two plates that is designed to be
used as a stand-alone system
4.2 Touchscreen Buttons
Inactive buttons are not highlighted (1). Active buttons are highlighted (2).
1
2
4.3
Configuration
CAUTION
Incorrect configuration of the E-Drive system may cause performance
problems and may damage valve pins and gate inserts.
CAUTION
4.4 E-Drive Actuator Models
The E-Drive actuator is available in two models.
Table 4-1 E-Drive Actuator Models
Model
Stroke (mm)
Cooled
MSK040C-0600-NN
n.a.
No
MSK061C-0600-NN
n.a.
No
The size and options for the E-Drive actuator depend on the system
requirements. Please check your General Assembly drawings to learn the
type of E-Drive actuator in your system. An actuator’s maximum velocity
varies depending on the supply voltage. The possible velocities are shown in
the following table.
Table 4-2 Actuator Speed vs. Supply Voltage
MSK040C-0600-NN
MSK061C-0600-NN
Voltage—3*AC (V)
Max speed (mm/s)
Based on 8:1, 5 mm/rev
Max speed (mm/s)
Based on 8:1, 5 mm/rev
200
37
36
230
43
39
3-16
E-Drive Controller User Manual
OVERVIEW
© 2021 Mold-Masters (2007) Limited. All Rights Reserved.
