background image

CARE OF YOUR MICROPHONE

Your  microphone  is  a  delicate  precision  instrument  and  it  should  be  treated  as such.  Here  are 
some commonsense rules to keep your microphone healthy.

1. Be careful in your setup so that the microphone never falls to the floor.  

Never

 suspend the 

microphone by its cable, and be sure to position the cable so that it cannot be tripped over. 
Falls to the floor have been the ruin of many a microphone.  

                                                                                                                                                            
2. Keep the microphone in a safe place, such as its carrying case or a microphone locker, when 

not in use.

3. When plugging in the three-pin cable between the microphone and preamplifier, orient the 

plug correctly and plug the connectors in 

gently

. Rough handling or hurry-up plug-ins can 

result in bent or broken pins.

4. Do not expose the microphone to dusty, smoky or humid environments.

5. Any repairs must be performed by a qualified technician. There are no user serviceable parts 

in the MA-301fet.

6. Use a soft, lint free cloth to remove fingerprints and other blemishes on the microphone body. 

Never use chemicals, solvents or detergents.

Содержание MA-301fet









Отзывы: