Page
2
of
10
Moimstone MWP1100N: Connection to Samsung OS7000 & SCM
Requirements:
Basic Computer Network knowledge
1 or more - Wireless Access Point (WAP)
Name of the SSID for the wireless network that the phone system is connected to.
Wireless “Password key” of this SSID.
What wireless Authentication protocol is being used (this info ONLY really needed, if more than 1
Access Point):
(supported protocols: None, WEP-OPEN, WEP-SHARED, WPA-PSK-TKIP,WPA-PSK-CCMP, WPA2-PSK-
TKIP,
WPA2-PSK-CCMP, WPA-EAP-TKIP, WPA-EAP-CCMP, WPA2-EAP-TKIP, WPA2-EAP-CCMP)
A laptop/PC, configured to be on the same LAN as the wireless network.
Samsung OS7000 or SCM Product with
3
rd
Party SIP License
already applied
and MGI/OAS resources , also configured to be on the same LAN as the WAP
A
configured 3
rd
Party SIP Extension
in the OS7000 or SCM system
(User ID, SIP Auth. User Name & SIP Auth. Password)
Instruction Outline:
A.
Assemble the handset per instructions enclosed in the box.
B.
Power up the handset, by holding down the (red) END button.
C.
Place on charger, if needed. (It is suggested, to work with a fully charged handset…)
D.
Connect your PC/Laptop to the LAN (either through the Access Point or Ethernet on same LAN as
Access Point)
E.
Confirm that the network is functional by pinging the IP Address (VIA Wi-Fi) of the OS7000 MP or SCM
Server from the PC/Laptop
F.
Follow Part 1, 2 and 3 to complete handset setup to the Samsung phone system
1.
Confirm necessary information for the 3
rd
Party SIP extension/extensions in the OfficeServ 7000 or
SCM system.
2.
Connect to the handset to the wireless network (SSID) using either method
A
or
B
in Part 2 below.
3.
Authenticate the handset using the WEB GUI of the Moimstone MWP1100N.
