11. HOLD CYLINDER FIRMLY AND PRESS SIDE SUPPORT ARMS AWAY FROM CYLINDER
(
ENSURE THAT C-CLAMP IS STILL SECURE
). REMOVE CYLINDER. SEE BELOW.
12. INSTALL NEW CYLINDER BY REVERSING STEPS.
NOTE: NEW CLYINDER WILL HAVE RETRACTED ROD. WAIT UNTIL CYLINDER IS
PLACED BETWEEN SIDE SUPPORT ARMS. THEN PIVOT CYLINDER, LOOSED FITTING
ON END OF ROD. PULL OUT ROD TO SECURE ROD END PIN TO MAIN TUBE AT
BOTTOM OF LIFT. ALWAYS BLEED SYSTEM AFTER REPLACING/REPAIRING
CYLINDER.
- END OF DOCUMENT -
