3
Power Connections
Connect the ground terminal to the closest point on the chassis of the vehicle.
Keep this ground wire to less than 39" (100 cm) in length. Use 8 gauge
(or heavier) wire.
Connect the remote terminal to the remote output of head unit using 16 gauge
( or heavier ) wire.
Connect an empty fuse holder within 18" (45 cm) of the car battery, and run 8 gauge
(or heavier) cable from this fuse to the amplifier location. Then connect the fuse
holder to the "BATT+" (+12V) connection on the subwoofer rear panel.
Fig.4
Fig.3
Chassis
ground
point
Battery
FUSE
NOTE:
In this connection, the
AUTO TURN OFF switch is in the
ON position.
Chassis
ground
point
to REMOTE TURN-ON
terminal of head unit
Battery
FUSE
NOTE:
In this connection, the
AUTO TURN ON switch is in the
OFF position.
