Moffat turbofan EH Series, Инструкция по установке и эксплуатации

Страница: 12 / 33

Operation - Using the Holding Cabinet
10
H
ALF
S
HELF
O
PTION
NOTE:
This cabinet can be used with ‘ Half Tray Shelf ’ or
‘ Full Tray Shelf ’ settings. This allows two
separate recipes to be run on the same shelf,
each with a separate timer. For a description on
how to set-up and use the ‘ Half Tray Shelf ’ or
‘ Full Tray Shelf ’ settings, refer to ‘ Manager
Mode ’ - ‘ Hold Timers ’.
NOTE: If ‘1/2 Shelf ’ option has been selected in ‘ Manager
Screen 3 - 1/2 Shelf ’, when the product is selected,
one of the screens above will display, depending
on which selection has been made. (‘1/2 Shelf -
Load Right ’ or ‘1/2 Shelf - Load Left ’).
Select the ‘1/2 Shelf’ product required.
The product will display as either on the right side of the
shelf or left side, depending on which 1/2 Shelf option
was selected (
1/2 Shelf - Load Right or 1/2 Shelf
Load Left).
The colour of the loaded shelf will be the same as the
frame around the produced image selected.
The shelves can be loaded with a combination of Full
Shelf and 1/2 Shelf options as required.
M
ANUAL
S
HLEF
O
PTION
NOTE: If ‘ Manual Enabled ’ has been selected in ‘ Manager
Mode - ‘ Screen 3 - Manual Enabled ’, the ‘ MANUAL ’
will be displayed as the first recipe in the ‘ Select
Product ’ screen when an empty shelf is selected.
Selecting the ‘ MANUAL ’ button allows the user to
manually enter the hold timer without using a pre-
set recipe.
The manual shelf will be displayed in black shelf
colour and no recipe name will be shown on the
shelf.
Press for next / previous
MANAGER screen.