Installation Instructions
8
PREPARATION (CONT.)
Prior to use, it is good practice to review all safety and
precautionary warnings to ensure safe use of your
appliance . For more information, please refer to pages 2
and 3 for greater detail .
Unpacking
Please install the decorative cover for bottom beam onto
your refrigerator after unpacking and adjust the front
leveling legs to level your refrigerator . The following pages
will provide more detail on installing the decorative cover .
Connecting Your Refrigerator to the Power Supply
Your refrigerator will enter a default factory state after
connecting to the power supply and it will display target
temperatures for the refrigerator compartment and
freezer compartment .
Storing Food in the Refrigerator
Once installation is complete, you may want to wait until
the compartments have reached their required operating
temperatures .
Tips: The interior temperature may require a certain
period of time to reach balance if the setting temperature
is changed or if additional items are added to the
refrigerator . Such a period of time depends on the
change to the setting temperature, the surrounding
temperature, opening frequency, the amount of the
stored food and etc .
4
START TO USE
• Before initial start, keep the refrigerator still for two
hours before connecting it to power supply .
• Before putting any fresh or frozen foods, the refrigerator
shall have run for 2-3 hours, or for above 4 hours in
summer when the ambient temperature is high .
• Keep enough space for convenient opening of the
doors and drawers ensuring there are no obstructions .
595mm
1033mm
545mm
1082m
m
135°
5
STARTING
Precautions shall be taken to prevent fall of the handle
from causing any personal injury .
TOOLS REQUIRED
Phillips screwdriver
Screw hole
Screw
Screw cover
Assembly steps
a . Use cross screwdriver to fix screws
into the screw
hole
tightly
b . assemble the screw hole caps
on the screw hole
of handle
6
DOOR HANDLE INSTALLATION
