Moffat BLUE SEAL EVOLUTION Series, Инструкция по установке и эксплуатации, Страница: 12 / 22

10
Installation
Commissioning
Before leaving the new installation;
Check the following functions in accordance with the operating instructions specified in the
'Operation' section of this manual.
 Check the current draw and loading for the equipment. Refer to the 'Specification' section
for the correct electrical requirements.
 C heck that all the connections are correct and that all cover panels have been re-fitted.
 Check that the appliance functions in accordance with the operating instructions.

Ensure that this instruction manual is left with the appliance.
 Ensure that all the relevant details and contacts have been added to the front of this
manual.
Ensure that the operator has been instructed in the areas of correct operation and shutdown
procedure for the appliance.
This manual must be kept by the owner for future reference and a record of
Date of Purchase, Date of
Installation and Serial Number of Unit recorded and kept with this manual. (These details can be
found on the Rating Plateattached to the bottom right hand corner of the bottom sill. Refer to
the ‘Installation’ section).
NOTE:

If for some reason it is not possible to get the appliance to operate correctly, turn ‘Off’ the
electrical power supply and contact a qualified service person. The supplier of this
appliance will be able to recommend a suitable person.

Make sure that the electrical supply is turned ‘Off’ before any service or maintenance work
is carried out.
For the Refrigeration Cabinet Installation refer to the Refrigeration Cabinet Installation and
Operation Manual supplied with the appliance.