Moen HKEB500-D Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 14

Moen HKEB500-D Скачать руководство пользователя страница 9

8

Basic Use Function

Rear Wash

1. Turn the lever counterclockwise from the vertical position.
2. The nozzle for rear wash extends forward and the fresh water spray function starts.
3. The water volume decreases while turning the lever towards the vertical position. It will completely shut
off when the lever is on the vertical position.

Front Wash

1. Turn the lever clockwise from the vertical position.
2. The nozzle for feminine bidet (front wash) moves forward and the fresh water spray function starts.
3. The water volume decreases while turning the lever towards the vertical position. It will completely shut
off when the lever is on the vertical position.
Note: Front wash nozzle is slightly longer when fully extended and directs spray more in the forward direction.

Stop

1. During wash or bidet status, rotate the lever to the vertical position to stop the freshwater spray.
2. The nozzle moves back to the original position.
3. The water volume decreases while turning the lever towards the vertical position. It will completely shut
off when the lever is on the vertical position.

«
...
7
8
9
10
11
...
»

Содержание HKEB500-D















Отзывы:

Нет отзывов