Moeller SmartWire SWIRE-GW-DP, Оборудование, инженерия и описание функций, Страница: 31 / 49

Diagnostic data
27
11/06 AWB1251-1590GB
Diagnostics information format
Reading of the diagnostics is implemented directly via the DP
diagnostics command or via the defined diagnostics byte of
the PROFIBUS-DP master using the PROFIBUS-DP
configuration. Observe the documentation of the master
device here.
At least 11 octets are read as diagnostics. They contain the
following information.
Table 12: Address position of the diagnostics information in a
DPV0 or DPV1 master
Diagnosticsp
osition Designation
Octet 1
Bit 0 Station does not exist
Bit 1 Station not ready
Bit 2 Configuration error
Bit 3 Additional diagnostics information
Bit 4 Function not supported
Bit 5 Invalid DP slave response
Bit 6 Parameterization error
Bit 7 Master already present
Octet 2
Bit 0 Parameterization request
Bit 1 Static diagnostics
Bit 2 Not used, always 1
Bit 3 Response monitoring activated
Bit 4 Freeze mode active
Bit 5 Sync mode active
Bit 6 Not used
Bit 7 Slave deactivated