Customer Service 908-368-1025
︱
Page 6 of 6
Bx4
Cx4
Dx4
Fx1
Hardware & Tool required
STEP 2:
2
Assembly is completed. The bed is ready to use now!
NOTE:
Hardware may loosen over time. Periodically check that all connections are tight.
1
1
2
B
D
C
F
Line up the
Bed Frame (2)
board’s pre-drilled holes to match those of the
Headboard (1).
Secure the
Headboard (1)
to the
Bed Frame (2)
by using 2 pieces of
Bolt (B)
with 2 pieces of
Spring Washer (D)
, 2 pieces
of
Flat Washer (C)
into the
Bed Frame (2).
Then tighten the
Bolts (B)
by using the
Allen Wrench (F).
Repeat the same procedure for each bolt and each side of the
Bed Frame (2).
STEP 1:
CONNECTING BED FRAME TO HEADBOARD
Carefully position the assembled bed to the desired location by four adults
.
