Page 3 of 4
STEP 3:
STEP 4:
Hardware & Tools required
Hardware & Tools required
Cx2
Ex2
Fx2
Gx1
Place 1 piece of
Leg I (3),
1 piece of
Leg II (4)
, and
End Panels (5)
to the assembled
Desk Top (1)
and
Rails (2)
as shown.
Insert 2 pieces of
Medium Bolt (B)
with 2 pieces of
Spring Washer (E)
and 2 pieces of
Flat Washer (F)
into the pre-drilled holes
on the end of
Metal Support Rail (6)
through the pre-drilled holes on
Legs (3&4)
.
Insert 1 piece of
Short Bolt (D)
with 1 piece of
Spring Washer (E)
and 1 piece of
Flat Washer (F)
into the pre-drilled holes on
Desk Top (1)
through the pre-drilled holes on
Metal Support Rails (6)
as shown.
Use
Allen Wrench (G)
to tighten all
Medium Bolts (B&C)
,
Long Bolts (A)
, and
Short Bolt (D)
clockwise until secure.
5
Bx2
Dx1
Fx3
Gx1
Ex3
Place the remaining 1 piece of
Leg I (3),
1 piece of
Leg II (4)
, and
End Panels (5)
to the assembled
Desk Top (1)
,
Rails (2)
,
Leg I (3)
, and
Leg II (4)
as shown.
Insert 2 pieces of
Medium Bolt (C)
with 2 pieces of
Spring Washer (E)
and 2 pieces of
Flat Washer (F)
into the pre-drilled holes
on the end of
Rail (2)
through the pre-drilled holes on
End panels (5)
.
Use
Allen Wrench (G)
to tighten
Medium Bolts (C)
.
Do not fully tighten
Medium Bolts (C)
at this step.
1
2
2
4
4
3
3
E
C
F
G
C
E
F
5
2
2
1
4
4
3
3
6
6
B
E
F
G
D
F
E
G
B
E
F
DESK
