Page 2 of 4
STEP 1:
STEP 2:
Put
Desk Top (1)
upside down on a carpeted or padded surface.
Place 2 pieces of
Rail (2)
to
Desk Top (1)
as shown.
Insert 4 pieces of
Long Bolt (A)
with
4 pieces of
Spring Washer (E)
and 4 pieces of
Flat Washer (F)
into the pre-drilled holes
on
Desk Top (1)
through the pre-drilled holes on
Rails (2)
.
Use
Allen Wrench (G)
to tighten
Long Bolts (A)
clockwise until secure.
Hardware & Tools required
Hardware & Tools required
Ax4
Ex4
Fx4
Gx1
1
2
E
A
Place 1 piece of
Leg I (3),
1 piece of
Leg II (4)
, and
End Panels (5)
to the assembled
Desk Top (1)
and
Rails (2)
as shown.
Insert 2 pieces of
Medium Bolt (C)
with 2 pieces of
Spring Washer (E)
and 2 pieces of
Flat Washer (F)
into the pre-drilled holes
on the end of
Rail (2)
through the pre-drilled holes on
End panels (5)
.
Use
Allen Wrench (G)
to tighten
Medium Bolts (C)
.
Do not fully tighten
Medium Bolts (C)
at this step.
4
1
5
2
F
A
E
F
E
F
E
F
A
A
G
Cx2
Ex2
Fx2
Gx1
2
2
3
5
G
C
E
F
C
E
F
DESK
