MODSTER SR100 Hurricane, Руководство пользователя

Страница: 26 / 34

F
Manual - MODSTER SR100 Hurricane
26 www.modster.at
18.8 Rotate counterweight on the front of the jib
boom by clockwise direction to adjust its position,
ensuring jib boom swing CG is located on SR7.
18.6 Move SR6 to adjust the cord tied in step 15 if it is too tight (move to SR6 direction) or if too loose
(move to SR4 direction), to keep the jib boom with 30 - 35mm expand distance to mast when the sail
stick is at lowest position.
18.7 Move SR7 to adjust the distance between the jib boom and the mast if they are too close (move to
SR6 direction) or if too far away (move to counterweight direction) to keep about 8 - 12mm between the
jib boom and the mast.
Note : If need to adjust main sail expand angle, move SR2 to SR3 direction to increase angle, or move SR3 to mast
direction to decrease angle.
But normally the position of SR2 is preset and no need to adjust.
18.5. Move SR5 to adjust the expand angle when you
power on and move up the sail stick.
Make sure the jib sail is able to travel larger angle than
the main sail(normarlly the jib sail travels about 90° -
100°, the main sail travels about 80° - 90°).
If it is too tight(angle too small), move SR5 to SR4
direction to increase the angle. If it is too loose(larger
angle), move SR5 to SR6 direction to decrease the
angle.