Modern Forms Axis 44 Flush, Руководство по установке

Страница: 24 / 38

FH-W1803-44
Axis Flush Instructions 24
10. Controlling the Fan
Your fan was delivered to you with the included control already paired to
your fan.
A: Light On/Off, Bright/Dim
B: Fan On/Off, Speed Up/Down
C: Season (Summer/Winter)
Air-Gap Switch: Pull tab to power off in case of emergency. Not
necessary for normal fan operation (only included with wall control).
NOTE : Your fan features 6 speeds. An audible tone will indicate when
the speed is increased or decreased. When the fan has reached the
minimum/maximum speed level the fan will beep twice.
Controlling One or Multiple Fans with Remote or Wall Controls
The Bluetooth Remote or Wall Control is capable of controlling
an unlimited number of fans within line of site.
See (Fig. 10C) for Pairing.
NOTE : Pairing must be completed within three (3) minutes of
powering the fan. Pairing must be completed within three (3) minutes of
powering the fans you want to have on the same controller. Power
down the target fans circuit for 30 seconds and then turn it back on.
Hold the fan and light button for 10-15 seconds until you hear an
audible beep from each fan.
NOTE: Fans you do not wish to have on the same controller should
remain powered down or wait for the 3 minute pairing window to close
for that specific fan.
Synchronizing Control Across Multiple Fans
If you are controlling multiple fans with one controller, fans/lights
may be synced by referring to Fig. 10B and instructions on the next page.