2
Ambiance Wall Hung Electric Fires
INSTALLATION INSTRUCTIONS
This Electric Fire must be installed by a qualified, competent installer
.
A.
Location
1.
The fire must not be in contact with any combustible materials.
2.
The heater, which is located at the base of the fire, must be a minimum of 16
inches away from any combustible material.
3.
It is important that the wall on to which the fire is to be installed is of sound
construction. All fasteners must be suitable for the type of wall, must be secure
to the wall and capable of taking the weight of the fire and the face.
4.
The fire must not be installed in an area where there is restricted air flow around
the fire.
5.
This appliance is for indoor installation but is ok to be installed outside in fully
covered installations free from damaging weather (rain snow etc.)
6.
The appliance must be kept away from any source of damp or moist conditions.
Avoid any close contact with water.
7.
If there is any doubt regarding the suitability of the installation site contact your
supplier.
8.
These fires produce heat consequently it is important to ensure that a suitable
wall covering is selected behind and around the appliance. Typical wood frame
drywall construction is suitable.
