![Modena WF 652 Скачать руководство пользователя страница 33](http://html1.mh-extra.com/html/modena/wf-652/wf-652_manual_1817592033.webp)
English
32
Make a check on things below before contacting our Service Center in case of interruption of
operation:
Problem
Error Code
Possible Cause
Solutions
The machine
fills overtime.
“Spin” LED
flickers.
1. The water tap is not open.
2. The drain hose is put down.
3. The water inlet valve is
damaged.
1. Open the water tap.
2. Hook up the hose.
3. Change the water inlet
valve.
There is a Door
lock alarm.
“Rinse” LED
flickers.
1. The door is not locked well.
2. Garment is caught
between the door and the
seal.
3. The door lock is
damaged.
1. Lock the door well.
2. Put the garment into
the drum.
3. Change the door lock.
The machine
drains overtime.
“Rinse” and
“Spin” LEDs
flicker.
1. The drain hose is
squashed or kinked.
2. The drain pump filter is block.
3. The drainage system
pipes are blocked.
1. Check the drain hose.
2. Clean the filter.
3. Check the drainage
system and clean it.
Water overflows
the machine.
/ Water sensor
works abnormal.
“Washing” LED
flickers.
1. The water inlet valve is
damaged.
2. The connection between
the water sensor and
wire is not secure.
3. The water sensor is
damaged.
1. Change the water inlet.
2. Check the connection
and ensure it is
secure.
3. Change the water
sensor.
The motor does
not work.
“Washing” and
“Spin”
LEDs flicker.
1. The connection between
the motor and wire is not
secure.
2. The motor is protected
because of over-heat.
3. The motor is damaged.
1. Check the connection
and ensure it issecure.
2. Check if the machine is
overloaded. Switch off
the machine, and retry
when the motor
becomes cool.
3. Change the motor.
There is a
heating tube
fault.
“Washing” and
“Rinse”
LEDs flicker..
1. The connection between the
heating tube and wire is
not secure.
2. The heating tube is
damaged.
1. Check the connection
and ensure it is secure.
2. Change the heating tube.
There is a
temperature
sensor fault.
“Washing”,
“Rinse” and
“Spin” LEDs
flicker.
1. The connection between
the temperature sensor
and wire is not secure.
2. The temperature sensor
is damaged.
1. Check the connection
and ensure it is
secure.
2. Change the
temperature sensor.
Part 8
:
Problem & Solution
Содержание WF 652
Страница 20: ......
Страница 39: ...English 16 ...