English
24
2. Leg adjustment
-
For stable operation, place the washing machine on flat surface.
-
Your washing maching is equipped with legs that can be adjusted.
If the floor surface is not flat, loosen the leg bolts manually by
hand and adjust the height of the legs so that the washing
machine is stable.
-
Turn left for higher and turn left for lower..
-
After the washing machine is stable then tighten the leg bolts.
3. Connecting the water supply hose
c) Water supply hose
-
Connect the water hose to the water inlet on the back of the
washing machine.
-
Connect the other side with faucet.
-
Don’t pull the hose, if it is too short then cgange to the longer
hose.
or
-
Check if there is leakage on connection
with the faucet.
d) Drain hose
-
We recommend you to use drain hose
attached to the machine and directly inserted
into the floor drain with the width of the through
entry not less than 4 cm.
-
If you don’t have direct floor drain, the drain
hose can be connected to sink hose drain
branch with the width of the sink entry shall not
less than 4 cm or directly to sink with maximum
height 90 cm.
-
If the drain hose is too long, it can cause the
wash
ing machine doesn’t work optimally.
