Modena Semplice Series, Руководство пользователя

Страница: 18 / 29

18
Turning On The Appliance
Starting a wash cycle:
1.
Draw out the basket (see "Loading the Basket").
2.
Pour in the detergent (see “Filling the detergent”).
3.
Insert the plug into the socket. The power supply is 220-240VAC 50 Hz, the
specification of the socket is 10A 250 VAC.
4.
Press the power button to turn on the appliance,
5.
Connect the inlet hose to the tap, make sure that the water supply is turned on
to full pressure, or add water to the tank manually.
6.
Select a suitable program according to the “Wash
Cycle T
able”;
7.
If a program is selected, the indicator light will turns on. Then press the Start/
Pause button, to start the washing process.
Changing The Program
Premise: You can modify the washing program, if the dishwasher have only worked
for a short time. Otherwise, the detergent may have been released, and the
appliance has drained the rinse water. In this case, the cycle must be restarted.
1. Press Start/Pause Button to pause the machine when the door is closed,
2. Press Program Button more than three seconds the machine will cancel the
program and be in standby state, then you can change the program to the
desired cycle setting.
NOTE:
EN 50242: This program is the test cycle. The information for
comparability test in accordance with EN 50242, are as
follows: The power consumption when turned off is 0.49W,
and on standby mode is 0.49W
NOTE:
When you press the Start/Reset button to pause the washing process, the
dishwasher will rings every minute until you press the Start/Reset
button to start again.