![Modena Semplice Series Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/modena/semplice-series/semplice-series_user-manual-book_1817587011.webp)
11
Adjusting Salt Consumption
Please follow these steps below to adjust the salt consumption.
Step 1:
Enter the setting
Close the door, within 60 seconds after turned on, press the Start/Pause
button and hold for 5 seconds, the machine will enter the salt setting
mode.
Step 2:
Select a certain level of salt consumption
Press the Start/Pause button to select the proper set according to your
local environment, the sets will change in the following sequence:
H1->H2->H3->H4->H5->H6.
Step 3:
Exit the setting
If there is no operation within five seconds, the machine will exit from the
setting mode and turns to standby status.
There are 6 levels of salt consumption. It is recommended to select the level
according to the table below:
WATER HARDNESS
Setting on the
water softener
Digital display
Salt consumption
(g/cycle)
°dH
1)
Mmol/l
2)
0 - 5
0.0 - 0.94
1
H1
0
6 - 11
1.0 - 2.0
2
H2
4
12 - 17
2.1 - 3.0
3
3)
H3
8
18 - 22
3.1 - 4.0
4
H4
13
23 - 34
4.1 - 6.0
5
H5
20
35 - 55
6.1 - 9.8
6
H6
40
1) German unit of measurement for water hardness
NOTE:
⚫
The salt container must be refilled only when the salt indicator light in the
control panel lights up. Depending on how fully the salt dissolves, the salt
indicator light may still on even though the salt container has been filled.
If there is no indicator light in the control panel (for some models), you
can judge when to refill the salt into the container by the cycles that the
dishwasher had run.
⚫
If there are spills of the salt, running a soak or a rapid program is a must
to remove the excess salt.
Содержание Semplice Series
Страница 1: ...User Manual Book Multipurpose Washer Semplice Series WS 1020 G ...
Страница 6: ...6 PART 2 NAME OF PARTS ...
Страница 29: ...11 20 ...