Modena ES 10A3, Руководство пользователя

Страница: 9 / 19

9

If the bathroom size is too small, the water heater can be installed
at another place. In one condition, the water heater should be
installed closely to the set-point of its usage to optimize the heat of
the water.
Plumbing Connection

The dimension of used pipe is G1/2 (”BSP ½”); the maximum and
minimum pressures of inlet should use Pa (Bar) as the unit.

Connect the pressure relief valve with the water heater on the inlet
of the water heater.

In order to avoid leakage when connecting the plumbing, the
rubber seal gaskets that are provided with the water heater must
be added at the end of the threads to ensure the connection is
leak-proof (see Picture 8).
Picture 8
Machine Body
Rubber Seal Gasket
Hot Water Outlet
Controller Handle for
Mixing Valve
Power Cord
Hot Water
Outlet Valve
Cold Water Inlet
Pressure Relief /Safety Valve
Pressure Relief Hole
Rubber Seal Gasket
Joint Screw for Cold Water Inlet