Modena DD 65 L, Руководство пользователя

Страница: 6 / 10

6
How to use a dispenser with three taps:
-
To dispense the hot water, push the left button.
-
To dispense the normal-temperature water, push the middle button.
-
To dispense the cold water, push the right button.
The appliance is equipped with a safety on hot water button to prevent the danger of the reach of
children. Scroll and press the button to dispense hot water.
If the red indicator light is on, it indicates that the process of heating water is running. If the blue
indicator light is on, it indicates that the process of cooling water in the tank is running.
If the yellow indicator light is on, this indicates the gallon water is empty. Replace with a new one
immediately. The indicator light will turn off when the new galon is replaced. The appliance will run
normally.
Attention:
-
Beware! Avoid hazard of hot water.
-
Cabinet door should be closed. If not, the pipe will not work out.
1. In order to avoid unwanted incidents, always disconnect the power cord from the power source
before cleaning the dispenser.
2. This dispenser has been disinfected prior to shipping.
3. Water pipe, water tank, and heating element must be cleaned by expert technician once a year to
maintain the machine to its good condition and to extend the applian
ce’s lifespan. Do not attempt
to disassemble the machine in order to avoid damage to the machine.
4. Use soft and wet cloth to clean the surface of the dispenser. Use soft and dry cloth to dry the
surface. Do not let water enter the
appliance’s engine.
5. Make sure the power cord is unplugged from the power source when draining the remaining water
or when in a maintenance or when not in use for a long time. Meanwhile, when the water from the
hot tap is cold, open the drain valve until there is no water in the appliance.
1. Install the dispenser on even surface. Avoid placing it in a humid place.
A minimum distance of 20 cm from the wall must be provided. Do not
store flammable substances near the dispenser.
Part 5 :
Precaution Action
Part 4 :
Maintenance
Part 3 :
How to Use