
English
17
1. Install the dispenser on even surface. Avoid storing in humid place.
Provide a minimum of 20 cm of distance from the wall and do not store
flammable substances near the dispenser.
2. To avoid damage to the machine, avoid connecting electrical cord or
pressing hot water switch (red) until the water can flow out of hot water
tap without obstruction.
3.
If the dispenser won’t be used for a long period, turn off the heater and
cooler switches and disconnect the cord from the electrical outlet and
drain the water through the drainage.
4. Do not use chemical substances or direct water rinsing to clean the
dispenser. Use soft cloth instead.
5. Do not pull the cord to disconnect the cord from the outlet. Pull the cord
head with dry hand.
6. Do not put the dispenser horizontally. Inclination should not exceed 45°
to avoid damage to the compressor.
7. The thermostat on the dispenser has been adjusted by the manufacturer.
Do not attempt to modify the thermostat to avoid unwanted effect.
Part 5:
Precaution Action