English
16
Attention :
-
This unit is designed for indoor use.
-
Make sure the pipes are installed properly and the cabinet doors closed securely
-
When the water in the gallon is empty, turn off the red switch (heating) before replacing it with a
new one.
-
Avoid putting it in a humid, wet and poor electrical installation because it can cause an electric
shock or fire outbreaks.
-
Do not place flammable objects near the dispenser.
-
Do not put it in direct sunlight and rain because it can degrade and cause electrical leakage
hazard.
-
Do not connect this dispenser to the source of electric current or pressing the heater if in the
tank there is no water or no water flows from the hot water tap when the button is pressed.
-
Do not modify the power cord on the unit or connect using extension of electricity to prevent a
short circuit and fire hazard.
-
Do not touch the back or the condenser to avoid shock hazards.
How to use a dispenser with three taps:
To dispense hot water, push the left button / tap.
To dispense normal-temperature water, push the central button / tap.
To dispense cold water, push the right button / tap.
How to Switch O3 (DD 75 L)
Press O3 button to turn on, the button in the back side of dispenser, then hold up to 5 seconds and
release to switch, indicator lights O3 lights will go on for 1.5 hours. During the O3 indicator lights/
work should not be drinking water in the dispenser.
The unit is equipped with a safety on hot water button to prevent the danger of the reach of children.
Scroll and press the button to dispense hot water.
Attention:
Avoid exposure to hot water hazard.
Cabinet doors should be closed.
Buzzer or alarm will be ringing when the water in gallon is empty and the water shortage indicator
will be on.
1. In order to avoid unwanted incidents, always disconnect from electrical power before cleaning the
dispenser.
2. This dispenser has been disinfected prior to shipping.
3. Arrange for the bottle support, water tube and heating element to be cleaned by expert technician
once a year to ensure that the machine maintains good condition and to extend usage. Do not
attempt to disassemble the machine in order to avoid damage to the machine.
4. Use soft and slightly wet cloth to clean the surface of dispenser, and use soft and dry cloth to
wipe the surface. Do not let water into the engine.
5. Make sure the power cord is unplugged from the power source when the discard excess water or
when maintenance or not use the unit for a long time. Meanwhile, when the hot water to be
cold/not hot, open the drain valve until there is no water in the unit.
Part 4:
Maintenance
Part 3:
How to Use