English 19
To set the time of use
To switch ON and switch OFF the light
To adjust the speed level (Low
– Medium – High)
To turn on and off the unit
If the button is pressed, the unit will work in which the motor speed depending on
the setting last.
-
Clock setting
The default setting for the time when it was first turned on is 12:00 PM. If the power is not connected or
cut off, the unit will return to the initial setting is 12:00 and you have to reset.
To set the clock can be done when the motor and lights are not in working condition. The way to setting
the clock as follows:
a. Touch the button
around 2 until 5 seconds, the display will show
, the first two
digits will blink which indicates for setting the hours. Then adjust with touch the button
to
increase or the touc h
for decrease. The largest digit for clock is 23
and not working
when exceeded 23 dan function
not working when will not work if it has reached the lower
limit of 00. The V ariabel of numeric when every touch is 01.
b. Touch the button
one more around 2 until 5 sec onds, the display will show
, the
last two digits will blink which indicates for setting the minut e. Then adjust with touch the button
to increase or the button
for decrease. The largest digit for minute is 59
and
not working when exceeded 59 dan function
not working when will not work if it has
reached the lower limit of 00. The Variabel of numeric when every touch is 01.
c. Press the button again to exit the clock setting.
-
Setting the timer
The Timer can be set when the motor or lamp is on. Timer duration is set in three priode: 5 minutes/ 15
minutes / 30 minutes/ Cancel.
4. To set the timer, touch the button
once for 5 minutes, twice for 15 minutes, thrice for 30
minutes, four times to cancel, five time for 5 minutes and so on. A fter the timer time is finish, the
motor and lamp will turn off automatically.
5. To change an ongoing timer, touch the button
for 5 seconds or until the correct time is
displayed.
