Modena BO 7838, Руководство пользователя

Страница: 6 / 56

6
•
Against the risk of touching the oven heater elements, remove
excess parts of the baking paper that hang over from the accessory
or container.
•
Never use it at higher oven temperatures than the maximum usage
temperature indicated on your baking paper. Do not place the baking
paper on the base of the oven. Against the risk of touching the oven
heater elements, remove excess parts of the baking paper that hang
over from the accessory or container.
•
When the door is open, do not place any heavy object on the door
or allow children to sit on it. You may cause the oven to overturn or
the door hinges to be damaged.
•
The packaging materials are dangerous for children. Keep packaging
materials away from the reach of children.
•
Do not use abrasive cleaners or sharp metal scrapers to clean the
glass as the scratches that may occur on the surface of the door
glass may cause the glass to break.
•
User should not handle the oven by himself.
•
During usage, the internal and external surfaces of the oven get hot.
As you open the oven door, step back to avoid the hot vapour
coming out from the interior. There is risk of burning.
•
Do not place heavy objects when oven door is open, risk of toppling.
•
Oven supply can be disconnected during any construction work at
home. After completing the work, re-connecting the oven shall be
done by authorized service.
•
User should not dislocate the resistance during cleaning. It may
cause an electric shock.
•
To prevent overheating, the appliance should not be installed behind
of a decorative cover.
•
Turn off the appliance before removing the safeguards. After
cleaning, install the safeguards according to instructions.
•
Cable fixing point shall be protected grid. Please put the food into or
on appropriate tools before putting them in the oven.
•
Please don’t cook the food dir ectly on the tray.
•
Please use temperature probe from factory only.
Electrical Safety
•
Plug the appliance in a grounded socket protected by a fuse conforming to the
values specified in the technical specifications chart.