28
guides on the top of the door. Then install the glass spring by pushing it
down to insert the glass into the guides. After installing the glass, the
lower tabs will lower, and the advance will end when you exit the guides.
Oven Sealing
Your oven has a sealing surrounding the inside edges which provides
the oven to work properly.
•
Check the state of the sealing periodically. If cleaning is
necessary, avoid using abrasives, corrosive detergents,
bleaches or acids.
•
If the sealing is damaged, consult with your nearest authorized
service provider in your area. Do not use the oven until it is fixed.
•
The changing procedure of the oven seal is as follows:
1.
Open the oven door,
2.
Remove the old seal by pulling out
the seal from corners one by one
as shown in (See Figure 14).
3.
The seal is secured with four
hooks. Secure the new seal with
these and press it into place.
Figure 13
Figure 14
