English
20
MODE NA gas cooker are designed specifically for long-term use of time so it does Not require complex
treatment. However, there are some things that are encouraged to care for your gas cooker quality.
Part of ENAMEL
Clean enameled layer with sponge and warm soap water. Do Not use the abrasive detergent. Dry after
washing process
Part of STAINLESS STEEL
Clean stainless steel part with a wet towel or special det ergent for stainless material. After that, dry it with
soft towel.
Grid
Part of enameled grid can be wash or put into the dishwasher
Burner
Burner can be removed and cleaned using soapy water. After cleaning, dry the burner completely and
reinstall it with the right position.
Ignition Plug and Gas Safety Device
Clean the ignition plug and gas safety device after cooking, especially if there are drops or spills from the
pan during cooking.
-
Always lower the heat or turn off the fire before lifting pan from the burner.
-
During cooking process, fat or oil must be carefully treat ed because this material can be burn if its
reach certain temperature.
-
When you smell gas, immediately release the regulator from the gas tank, do Not light a fire
and immediately contact MODENA Service Center.
-
Frequently check the gas hose, to make sure that gas hose is far from hot surface, and Not in bent
Part 6
:
Precaution Action
Part 5
:
Maintenance
NOTE:
Cooking equipment with a wide bottom surfac e will further accelerate the cooking process rather
than a smaller surface.
Diameter of cooking equipment does not exceed the maximum recommended size based on the
above table.
If the diameter exceeds the size of the cooking equipment that has been recommended, then the
hot stove / burner can not circulate properly, this can cause the glass top plate broken.
Maximum load of cooking equipment and food ingredients are 10 kg.
