Modena BC 0321 L, Руководство пользователя, Страница: 10 / 20

10
Do not use cookware with jagged edges or a curved base
Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking
zone. If you use smaller pot efficiency could be less than expected. Always centre your pan on the cooking zone
Always lift pans off the electric hob
– do not slide, or they may scratch the glass
Note: You can use any kind of pot or pan for Ceramic Hob. Make sure that base of your pot or pan is smooth, sits
flat against the ceramic glass, and same size as the cooking zone for better cooking performance
USING YOUR HOB
To start cooking
1. After the hob be connected to electricity and power on.
Press and hold the ON/OFF control button for about 3 second still
You will
hear a “beep” to turn the hob on.
Now the hob enter into Standby mode, all heat setting indicators
and Timer setting indicators shows “-”
2. Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
3. Touching the heating zone selection control button t select and active
the cooking zone you wish to use. The heat setting indicator of the
selected zone will flash when be active.
Notes: For BC 1721 L, to adjust heating level, just press the +/- button or
sliding the slider of corresponding cooking zone as in step 4.
Notes: For BC 1721 L , the timer/cooking zone selection icon is only
symbol to illustrate what the control button below is for
4. Then set heating level of cooking zone
Touch control models: BC Model
•
Set heat setting by touching the or button.
•
If press and hold either of the two buttons, the value will adjust
down or up rapidly, from 0 to 9 in circle.
Notes:
1. After connected to electricity, when power on, the buzzer of hob beeps once, all indicators light on for 1
second then off.