Model Tech Fun Fighters P-51 ARF, Руководство по сборке

Страница: 28 / 36

Page
❑
Remove the cowling from the fuselage and apply a couple of drops of
thin C/A into the three pilot holes to strengthen the surrounding wood.
❑
Slide the cowling back into place and realign it. Install and tighten the
three M2 x 10mm washer-head wood screws to hold the cowling firmly
in place.
❑
Install your muffler, high speed needle valve, propeller and the spinner
assembly, then connect the fuel tubing to your carburetor and muffler.
finaL asseMBLy
YOU'LL NEED THE FOLLOWINg PARTS FROM THE KIT:
YOU'LL NEED THE FOLLOWINg TOOLS AND SUPPLIES:
❑
Formula 560 Canopy Glue
❑
# 1 Phillips Head Screwdriver
❑
Modeling Knife
❑
Electric Drill
❑
5/64" (2mm) Drill Bit
❑
Straight Edge Ruler
❑
(1) Canopy
❑
Pencil
❑
Airplane Stand
❑
220 Grit Sandpaper with Sanding Block
❑
Masking Tape
❑
Paper Towels
❑
Cut out the canopy along the molded scribe line, then sand the edges of
the canopy smooth and straight.
step 1: aLigning the canopy
❑
For added realism and improved appearance, paint or apply self-adhesive
striping tape to the molded canopy frame.
❑
If you've purchased a pilot figure for your airplane, carefully paint and install it now before installing the canopy.