Modbus HD674-A003, Руководство пользователя

Страница: 22 / 30

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual Modbus Slave / Modbus TCP Master - Converter
Document code: MN674-A003_ENG Revision 1.000 Page 22 of 30
Figure 9: “Update Device” windows
UPDATE DEVICE:
By pressing the “ Update Device ” button, it is possible to load the created Configuration into the
device; and also the Firmware, if necessary.
If you don’t know the actual IP address of the device you have to use this procedure:
Connect the USB cable;
Connect the Ethernet cable;
Turn ON the converter;
Insert the IP “ 192.168.2.205 ”;
Press the “ Ping ” button, “Device Found! must appear”;
Press the “ Next ” button;
Select which operations you want to do;
Press the “ Execute update firmware ” button to start the upload;
When all the operations are “OK”, the updating is done;
Remove the USB cable.
At this point the configuration/firmware on the device is correctly updated.
If you know the actual IP address of the device, you have to use this procedure:
Turn on the Device with the Ethernet cable inserted;
Insert the actual IP of the Converter;
Press the “ Ping ” button, must appear “Device Found!”;
Press the “ Next ” button;
Select which operations you want to do;
Press the “ Execute update firmware ” button to start the upload;
When all the operations are “OK” the device automatically goes at Normal Mode