modbar espresso system, Руководство пользователя, Страница: 22 / 126

EN
22
7) Preferences screen:
Pressure units: This button sets the system’s
pressure units, in: bars or psi.
Temperature units: This button sets the
system’s temperature units, in: Celsius (C),
Fahrenheit (F) or Kelvin (K).
Volume units: This button sets the system’s
volume units to: Milliliters (mL) or Fluid
Ounces (oz.)
Advanced: This button navigates to the
advanced preference settings page.
8) Advanced preferences screen:
Machine name: This is a descriptive name for
the module, touch the name to highlight
the field, use the encoder wheel and push-
button to rename the machine if desired.
Line volume: This value is used to
accommodate for water in the line between
the espresso module and the espresso tap.
It may also be used to account for water loss
to absorption by the coffee puck.
The line volume setting may also be used to
correct discrepancies between two different
espresso modules that are using the same
brewing profile and/or volumetric setting.
For example, if two espresso modules are
both programmed to dispense 36 mL and
one of them dispenses slightly more than
the other, the line-volume setting may be
increased on the overproducing module to
adjust the output accordingly.
Lever operation mode: Use this setting to
control the behavior of the lever actuator on
the espresso tap. “Auto and Manual” allows
for the use of both automatic pressure
profiling mode and manual operation mode.
“Auto” limits the function to only automatic
pressure profiling mode. “Manual” limits
the function to only manual operation
mode.
Factory reset: This will return all of the
system settings to their original factory
values. ATTENTION! You will lose all stored
pressure profiles and other settings. A
confirmation screen is presented to confirm
the operation of Factory Reset.
Lighting: This button navigates to the lighting
settings screen.
Advance preferences page 2: This button
will navigate to page 2 of the advanced
preferences screen.
Save & Exit: You guessed it! This button
saves the settings changes and exits the
current screen.
9) Advanced preferences screen page 2:
Temperature mode button: This button will
toggle between Automatic and Manual
temperature modes.
Automatic temperature mode is calibrated
at the factory to deliver the best temperature
performance using a single temperature
setting.
Manual temperature mode gives you
independent control over the set points
of each temperature zone from the home
screen: Inlet boiler, outlet boiler, and brew
head. At the home screen, pressing the
Heat Zone button will allow you to cycle
through each zone and set its temperature
independently.
Rinse Time: he rinse time value controls
the number of seconds of the rinse cycle,
and can be modified for a shorter or longer
rinse cycle.
Rinse Power: The rinse power value controls
the motor speed percentage during the