modbar AV 1, Руководство пользователя, Страница: 78 / 110

EN
78
Display Operating Procedure
Description
“Technical” Programming
Press Enter
To Exit
Press b To Stop
10 pulses
12
To set the brewing time of a short shot, it will be necessary to activate the tap lever until water flows from the
group, activate again the tap lever to stop and store the desired dose.
G1B1 Saved
10 Pulses
↓ Short Dose
60
13
Press the button T1 or T2 to view the dose. Pressing the button T3 , the dose value will blink. Use the
button T1 or T2 to change the value, press the button T3 to confirm the desired value.
↓ Long
3 SEC RINSE
14
Press the T3 button to access the menu, then navigate using T1 and T2 to choose between
DOSE
,
BACKFLUSH
,
3 SEC RINSE
and
CONTINUOUS
, press the T3 button to confirm the option.
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• The brewing amount can be set in terms
of time (sec.), pulses, mass or brewratio.
• Once programmed, the Selection
Indicator remains lighted.
• It is possible to set the dose for both
a short and a long shot on the same
Selection Indicator.
• PULSE mode: control of doses in volume
• MASS mode: control of doses in mass
• BREW RATIO mode: ratio between the
coffee powder and the weight of the
drink
Program Dose
Group Dose
Settings
Group 1 Dose
Settings