Step 4 – Mount the 9 pin miniature tube socket with its retainer for the EL84
Drawing 2
shows where to mount the 9 pin miniature socket “V2” and its retainer. Make sure that pins 1 & 9
face the “TR1” side of the chassis. (Use #4 hardware).
(2)
(2)
9
Step 5 – Mount both side handles
Mount both handles to the sides of the chassis box using their supplied #8 hardware. (Doing this step now
will help you flip the chassis when mounting the two transformers).
.25
"
Mount both side handles.
(4)
(4)
(2)
Step 6 – Mount the Power Transformer (TR1)
Remove the 269EX power transformer from its packaging.
Drawings 2 & 3
show where to mount the power
transformer.
A) Cut off the gray wire as described on the drawing.
B) Place the transformer on its side and push the wires (one at a time) through their respective grommet holes
as indicated on the drawing.
C) Slowly tilt the transformer upright so that the mounting holes line up with the transformer feet, while
continuing to push each bundle of wires through the grommet holes. (Be careful not to dislodge the rubber
grommets).
D) Use #6 mounting hardware to fasten the power transformer in place.
(4)
(4)
(4)