Mocon CheckPoint 3, Руководство пользователя

Страница: 78 / 82

DANSENSOR
76 User Guide EN CheckPoint 3
P/N 340486-B
09/2017
Battery and charging

Do not attempt to replace the lithium-ion battery yourself - you may damage the battery,
which could cause overheating and injury. The battery should be replaced only by your
authorized MOCON service provider.

Charge the device with the included power supply, power plugs, and USB cable.

When charging, make sure the USB cable is fully inserted into the power supply before you
plug the it into a power outlet.

If using other third-party cables and power plugs, make sure that they are compatible with
USB 2.0 or later, and that the power supply and plugs are compliant with applicable
country regulations.

Replace damaged cables immediately. Using damaged cables or chargers, or charging
when moisture is present, can cause fire, electric shock, injury, or damage to the device or
other property.
Prolonged heat exposure

The power supply comply with applicable surface temperature standards and limits.
However, even within these limits, sustained contact with warm surfaces for long periods of
time may cause discomfort or injury.

Use common sense to avoid situations where your skin is in contact with the power supply
when it is plugged into a power source for long periods of time. For example, do not place it
under a blanket, when it’s plugged into a power source.

It’s important to keep the device and the power supply in a well-ventilated area when in
use or charging.
Explosive atmospheres

Charging or using the device in any area with a potentially explosive atmosphere, such as
areas where the air contains high levels of flammable chemicals, vapours, or particles, may
be hazardous. Obey all signs and instructions.
Cleaning

Never use hard tools or abrasive materials when cleaning any part of the device.

Never use cleaning agents containing chlorinated solvents or acetic or phosphoric acid.
These constitute a health hazard and could damage the device.

Avoid getting moisture in openings.

When using compressed air for cleaning, make sure that item has been disconnected from
the device.
Using connectors, ports, and buttons

Never force a connector into a port or apply excessive pressure to a button, because this
may cause damage that is not covered under the warranty.

If the connector and port don’t join with reasonable ease, they probably don’t match.
Check for obstructions and make sure that the connector matches the port and that you
have positioned the connector correctly in relation to the port.